We could obtain a fee while you use our affiliate hyperlinks. However, this doesn’t impression our suggestions.

My son is seven years outdated, and thus far, I’ve tried to chorus from proselytizing woodworking to him. My speculation, no less than for now, is that the love for woodworking ought to come naturally and be cultivated with pleasure. So when Asher visited my one-car storage store a number of weeks in the past and requested me if we might make quantity blocks – that’s, after he couldn’t discover his outdated ones – I mentioned sure. I beloved that he needed to construct one thing out of scratch, however I additionally knew his time on the store would subliminally educate him some woodworking expertise. 

Luckily I had the appropriate jig for the job, a small piece of plywood with two fences related to it: a brief fence on the backside and an extended one on the highest floor. 

This is the crosscut setting I exploit.

The Cross-cutting assist was inverted to permit Asher to chop safely with out kerfing my bench.

While primarily constructing the fence for cross-cutting proper angle cuts utilizing a pull noticed excessive floor (the decrease and shorter fence was meant to be clamped within the vise), I figured that in our case, I ought to flip the jig over and have the longer fence be tucked within the vise. Why did I do that? Quite frankly, I needed to cut back his probabilities of mistakenly skipping the slender ledge and sawing into my workbench. Giving him a number of inches of sacrificial floor can be simply what a younger, inexperienced child like him wanted. After measuring his quantity blocks and marking them, I confirmed him the right way to tuck the sawblade in opposition to the right-angle finish of the fence and gave him the okay to fireplace up the noticed and begin producing his personal sawdust. He sawed off a number of blocks from a chunk of scrap wooden that he fished out from considered one of my piles, after which referred to as it a day and went again inside to observe an episode of Spirit Rangers.


I declared victory and checked the 2 packing containers on my “father teaches his son woodworking” to-do checklist. I knew I want to write about this and share my academic expertise. Still, solely immediately, after I acquired to compose the photographs and the textual content, I believed that sooner or later, I want to enhance the cross-cutting assist and make it much more versatile and beneficial. 

My new and improved Cross-cutting assist would have a rabbet (MRK2) or a groove (MRK3) and can embody precut segments of fence at 45 and 90 levels that will likely be spaced from each other to permit the noticed to slip in between them. Constructing the help ought to be simple. Grooving (or dadoing) the plywood board on the desk noticed to match the thickness of the fence and mitering the segments on a miter noticed or the desk noticed. Then I’d solely should drop the segments, glue them down and make sure the hole between them equals the thickness of my Japanese noticed.

Product Recommendations

Here are some provides and instruments we discover important in our on a regular basis work across the store. We could obtain a fee from gross sales referred by our hyperlinks; nonetheless, we now have rigorously chosen these merchandise for his or her usefulness and high quality.

Source link


Please enter your comment!
Please enter your name here