While constructing a number of Shaker Oval Boxes, I grew to become concerned about an experiment with SketchUp. I had already designed all #Zero to #5 measurement bins in SketchUp. All the person elements of every field measurement had been designed individually. And these particular person SketchUp designs had been very useful in producing the work within the store.

But I grew to become concerned about realizing whether or not I might design one field in SketchUp, then Scale to make all different sizes. If this may work, it will have saved appreciable design effort – subsequently, the concept of an experiment.

My thought was to attempt the Scale Tool, nevertheless it’s difficult and should not behave as you anticipate.

In the next video, I present the experiment – making a #2 Shaker Oval Box from an already designed #Three measurement.

Here is the #3 Box that I used as the instance. The experiment was to make all different sizes from this already designed meeting. I began with the making of a #2 measurement from this #3.

 

Here are the elements that make up the #3 Box. Note the dimension of two 12-in. for the peak of the Box Band. Since the #2 measurement field has a 2-in. Box Band, I must scale the #Three by the ratio 2/2.5 or 0.8.

 

This reveals my choice of the Scale Tool on the #Three field. I choose the diagonal deal with and create a smaller field – then kind 0.8 (the ratio of the Box Band sizes).

Here you see the unique #Three field subsequent to the scaled #2 field. It appears to be like excellent – the field band on the #2 field is 2-in. vs. 2 1/2-in. within the #Three field.

 

However, that #2 Box has points. The Scale Tool additionally lowered thicknesses of the Bands, Top, and Bottom. These thicknesses will not be right for the #2 unique design. So, this Scaling course of is not going to present a correct element design. It appears to be like proper, however inside there are anomalies.

Nevertheless, I proceeded to make all the opposite sizes, realizing that the method is flawed. However, this “stacked” view appears to be like excellent.

Also, you’ll be able to see on this X-ray view, that every one the bins match inside the largest # four field.

Here is without doubt one of the units I produced in ash with pine Tops and Bottoms.

Here is the video…..

Tim

KillenWOOD

More from Tim Killen

Sign up for eletters in the present day and get the newest strategies and the way-to from Fine Woodworking, plus particular provides.

Get woodworking suggestions, professional recommendation and particular provides in your inbox

×


Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here