We could obtain a fee once you use our affiliate hyperlinks. However, this doesn’t influence our suggestions.
This easy jig allows you to reduce correct tenons and slice very skinny items. I take advantage of a flush-cut noticed as a result of it has no set to its enamel and, due to this fact, received’t injury the jig. Plus it leaves a easy floor.
The solely necessities for constructing the jig are a flat baseboard, equivalent to Baltic birch plywood, and information blocks of equal thickness which might be screwed to the baseboard at a 90º angle. I take advantage of taking part in playing cards to regulate the peak of the workpiece.
Slide your workpiece in opposition to the 90º information blocks, lay a separate information block on prime of the workpiece, align it with the shoulder mark, then clamp it to the jig. Saw the cheek and shoulder, flip the piece over, and reduce the opposite facet. This produces a wonderfully centered and parallel tenon.
The jig and card shims offer you exact management over the thickness of the offcut. So, you may reduce very skinny items for: bookmatching items for a small lid; shimming a unfastened joint; reducing key slots in mitered corners; making Dutchman patches; and creating small initiatives equivalent to bookmarks, picket playing cards and Christmas ornaments.
You can reduce longer slices in the event you add a information block on the alternative facet of the workpiece. Then, you might have your personal customized micro veneer mill! –Steve Branam
Product Recommendations
Here are some provides and instruments we discover important in our on a regular basis work across the store. We could obtain a fee from gross sales referred by our hyperlinks; nevertheless, we’ve got fastidiously chosen these merchandise for his or her usefulness and high quality.
