Question 1: 

From Scott:
I’ve been making stuff for so long as I can keep in mind.  I work as an electrician and I really feel as if I’ve an excellent sense of element and craftsmanship.  I’ve been woodworking for a few 12 months, totally on pine and poplar as I’m finances aware.  I’m getting 2- 1.5×10 ft 8/Four dwell edge boards of walnut for 20$.  And don’t wish to waste them.  When do I step as much as larger finish wooden??

Question 2:

From Matt:
After many hours of battling with my spouse I’ve discovered a design I feel we each can dwell with.  My spouse gave a bit floor and is keen to let me construct the mattress, and nights stands proven in Michael Cullen’s Contemporary Arts and Crafts Bed article.  

There are nevertheless two obstacles we have to overcome. 

1) Katie LOVES the nightstands proven in the article pictures. I’ve performed a little bit of digging however sadly I can’t discover plans for these night time stands. Hopefully there’s something on the market you may refer me to that may a minimum of get me moving into the proper path. If not I can in all probability cobble one thing collectively. I simply hate the thought of constructing a mistake and losing walnut at $9.50 bf. 

2) The Bed is primarily made out of veneered panels.

I perceive that sheet items permit extra flexibility in design as a result of they’re way more steady, however I kinda hate them.  I do know it’s silly, however I can’t assist it.  Is there a development methodology that I might use that will not dramatically change the look of the headboard, and footboard?  I feel that I might get away only a typical panel glue up however wouldn’t have the similar management over the grain sample.  I dwell in an space that has fairly dramatic swings in humidity so wooden motion might be an issue.  Do these panels should be handled any completely different than a desk prime?

 



Segment: Potpourri 

Barry – Favorite software: Hide glue

Ben – Using hot-melt glue to flush up a tablesaw throat plate

Anissa – Smooth Move: Forgetting to place types in earlier than putting in a face body

Question 3:

From Jesse:
Please ramble about how cool moving into lutherie has been. What have been a few of your favourite sources for studying lutherie stuff? Any specific books or VHS collections?

Your First Guitar

Good kits make nice guitars and provide loads of actual woodworking

If you’ve all the time wished to construct your personal guitar however feared the specialty instruments and strategies, contemplate a package.

FWW Index page – Our favorite resource for finding esoteric articles on the website.

Tomy Hovington on YouTube

Ted Woodford on YouTube

Making an Archtop Guitar Paperback by Robert Benedetto – Decent ebook however you couldn’t presumably construct a guitar utilizing simply this ebook

Question 4:  

From Clay:
I’ve been moving into woodworking for the previous 12 months. I’ve constructed up a small store in my storage with a desk noticed, miter noticed, sanders and routers, and a drill press. 

My spouse desires me to construct us a brand new farmhouse fashion trestle desk. The base shall be made up of 4×Four heart legs with 1” thick X-braces. I’ve by no means lower a mortise and tenon, I don’t have the finances for a domino, and I don’t wish to construct a desk that may crash to the floor with a thanksgiving feast on it! I’ve hooked up an image of the fashion I’m going for, and I’m largely involved about easy methods to connect the X brace items to the heart legs. I’ve a doweling jig, however I don’t know what dimension I ought to use, and can that be sturdy sufficient? Using biscuits doesn’t look like that would offer sufficient power, however possibly I’m flawed.

Listener Comments:

From Mike:

Love the present! I really feel compelled to jot down to you as a result of, simply moments in the past, I skilled my first ever kickback occasion. Yikes! In reality, it occurred whereas listening to episode #220, not lengthy after a prolonged dialogue on kickback in response to a listener query and Barry’s remark about needing to respect the “weird physics” of a desk noticed. Now I’ve egg on my face, however fortunately no lasting accidents. I feel the preliminary influence occurred on my hip proper the place my belt is so there have been a number of layers of fabric to cushion.

I contemplate myself tremendous cautious at the desk noticed and have by no means performed something this silly. The small 12″ x 3.5″ board I had simply ripped obtained hung up mid-cut as a result of the throat plate had slipped a bit beneath the peak of the desk. I wiggled it via safely, then determined to use the fringe of the just-cut board to run alongside the throat plate to get it to bump at the desk (to confirm that that was the downside), and in some way managed to let go of the board, dropping it onto the blade WHICH I HAD LEFT RUNNING. Yes. I understand how ridiculous this sounds from somebody who simply described themselves as tremendous cautious at the desk noticed. I used to be positively not giving 100% consideration to the process at hand (which was one other factor Ben mentioned in that episode). For my very own good, I’ll henceforth reserve listening to Shop Talk Live solely whereas driving, sitting quietly, or throughout hand work. Thanks for reminding us that all of us want reminders on security, even once we assume we’re tremendous cautious

Mike

Recommendations: 

Anissa – You’re wrong about podcast

Ben – Ear Hustle podcast

Barry through Mike Korsak – Winds of Change podcast


Every two weeks, a group of Fine Woodworking staffers solutions questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking inquiries to [email protected] for consideration in the common broadcast! Our continued existence depends upon listener assist. So in case you get pleasure from the present, be sure you depart us a five-star score and possibly even a pleasant touch upon our iTunes page.

 

Sign up for eletters right now and get the newest strategies and how-to from Fine Woodworking, plus particular gives.

Get woodworking ideas, professional recommendation and particular gives in your inbox

×




Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here