We might obtain a fee if you use our affiliate hyperlinks. However, this doesn’t influence our suggestions.

I have discovered a easy method to modify a picket lever cam clamp to maneuver a desk noticed fence or router fence in fractional quantities, utilizing easy-to-find {hardware}: a 14“-20 T-nut, 14“-20 carriage bolt, and matching wing nut, washer and hex nut. 

You can make your own cam clamps, or purchase them from a woodworking retailer.

Drill a 516” gap in a single finish of the cam clamp for the T-nut, and glue the nut in place (I used Weldbond adhesive). Thread the bolt by the nut, then cap it with the hex nut, washer and wing nut. 

Your micro-adjuster is prepared for motion.

I take advantage of these for adjusting the fences on my desk noticed and router desk. Just clamp the jig close to the fence and rotate the wing nut, inflicting the carriage bolt head to maneuver the fence. I made each right- and left-side variations so I can nudge the fence on both facet of the blade or bit.

With half a rotation of the wing nut I can nudge the fence 140” (a full rotation is 120“). 

I’ve discovered with this straightforward jig that I can sneak up on the absolute best settings for my fence. Plus, I can nonetheless use the cam clamps for my common clamping wants. -Jim Eckblad


Product Recommendations

Here are some provides and instruments we discover important in our on a regular basis work round the store. We might obtain a fee from gross sales referred by our hyperlinks; nonetheless, we’ve fastidiously chosen these merchandise for his or her usefulness and high quality.



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here