You’ll wish to do this DIY disco planter pot. Or you may all it a DIY disco ball planter. nevertheless you phrase it, it’s a keeper.

Not solely will it add an entire new vibe to your decor, will probably be a spark of dialog and it’s simply a lot enjoyable.

You’ve in all probability seen the viral disco ball planter. It’s a TikTok star of the craft world.

A row of mirrors – one after one other and one other. So charming! I even purchased one at an out of doors market not too long ago. But I wished a distinct model utilizing a conventional terra cotta planter.

OMG. I like the way it turned out. It’s so shiny and retro. Even if I’m in my paint garments and my hair in a chongo, I nonetheless really feel the Donna Summer vibes.

Covering a flower pot with mini disco mirrors a good suggestion so as to add a contact of sparkle to your lounge or patio house. You don’t should be a DIY professional to drag this off. And your favourite vegetation will thanks and possibly even develop stronger. I can’t assure that, however you by no means know!

Here’s a step-by-step information that can assist you accomplish this shiny dwelling decor challenge:

Supplies for DIY Disco Planter Pot:

DIY disco planter pot

Flower pot – I used a ceramic pot and one other that was a traditional terra cotta backyard planter.

Spray paint in silver (non-compulsory)

Mini disco mirrors

Strong adhesive glue – The tiles comes with an adhesive backing, however to make your mirror everlasting, go forward and use the glue. equivalent to E6000 or a sizzling glue gun.

Protective gloves – these are mini-mirrors and so they have sharp edges. 

Dollar retailer scissors – you’ll mess them up with this challenge.

Cover in your work floor in case any mini-mirrors fall.

Alcohol wipes to wipe away glue drips and to scrub the floor space of the tiles

Pair of tweezers (non-compulsory)

Masking tape

DIY disco planter pot

Directions for DIY Disco Planter Pot

Spray paint the pot if desired

The cause for that is so the background will match the mirrors. Every so typically there’s a hole between areas and the silver background makes it unnoticeable, versus a white background.

DIY disco planter pot

Prepare your workspace

Cover your work floor with newspaper or a drop material to guard it from any glue or mirror residue. This will make the cleanup course of simpler. This is a white ceramic pot I used as effectively. I didn’t add any paint.

DIY disco planter pot

Dust off and clear the flower pot. The floor of the planter ought to be clear and clear.

If your flower pot is soiled or has any residue on it, clear it completely and let it dry fully earlier than continuing.

Put on protecting gloves

Wearing gloves can assist shield your palms from any potential cuts or accidents whereas dealing with the mirrors.

DIY disco planter pot

Cut a strip of the mirrors. Remove the protecting backing.

Assemble all of it

Apply adhesive glue to the mirror

Using a small quantity of adhesive glue, rigorously apply it to the again of every mini disco mirror. Make positive to observe the directions on the glue packaging and keep away from utilizing an excessive amount of glue to stop extra mess.

Alternative: Apply a line of the glue and apply the mirrors that approach.

Attach the mirrors to the flower pot

DIY disco planter pot

NOTE: For a clean space, you may apply the mirrors by strips, reasonably than one-by-one. It makes the job a lot simpler! You don’t need an uneven disco ball sample. 

If your base is curvy or uneven, ranging from the underside of the flower pot, press every mirror firmly onto the floor, adhesive facet down. Place the mirrors shut collectively to create a cohesive and mirror-like impact. Continue this course of till all the flower pot is roofed, together with the rim. If you favor a particular sample or design, plan it out earlier than attaching the mirrors.

Let the adhesive dry

Use masking tape to carry the mirrors in place whereas the glue dries. Tear off any remaining masking tape. Allow the adhesive to dry in response to the directions supplied on the glue packaging. This might take a number of hours or in a single day, so be affected person and keep away from transferring or touching the flower pot throughout this time. Roll off any pesky glue strings when you used sizzling glue. 

Clean your mirrors

Use alcohol wipes to wipe away any smudges from the seams of the glass tiles.

Show it off!

DIY disco planter pot

Once the adhesive and sealant (if utilized) have absolutely dried, your mirrored flower pot is able to be displayed. Choose a sunny spot the place the mirrors can catch the sunshine and create a stunning impact.

As far as the kind of plant to place inside, that’s completely as much as you!  Remember to deal with the mirrored flower pot with care to keep away from any unintended injury or harm brought on by the sharp edges of the mirrors. 

Enjoy your fantastically adorned flower pot!

DIY disco planter pot

The better part is that this final myriad reflector craft will make you content each time you have a look at it. 

Uses for leftover mirror tiles:

Save and use for combined media tasks

Incorporate into polymer clay earrings or ring dishes.

NOTE: If you wish to make a conventional disco ball planter DIY – listed here are some choices I discovered on-line.

DIY disco planter pot


Disco ball impressed corazón

How to Paint a Frida Planter

DIY Mexican-pottery planters

Source link


Please enter your comment!
Please enter your name here