We might obtain a fee if you use our affiliate hyperlinks. However, this doesn’t influence our suggestions.
I discover slicing dowels on the band noticed to be a trouble. For one factor, the blade can seize the spherical inventory and twist it out of your hand should you’re not utilizing a assist cradle guided by the miter gauge. And should you’re slicing a number of dowels to the identical size, you need to arrange a cease of some kind. Even then, the minimize dowels are inclined to fly to the ground afterward.
Instead, I exploit this straightforward fixture for many of my dowel-cutting chores. It’s nothing greater than a 10″-long pine 2×Four with a V-groove sawn into one edge. I hooked up a plastic 6″ ruler to the precise aspect’s entrance face with double-sided tape and prolonged the inch marks throughout the flats on the highest face. I minimize a noticed kerf on the zero finish of the ruler, a bit deeper than the depth of the groove and screwed two 1⁄4″-thick plywood vertical guides on the left aspect of the noticed kerf.
To use the jig, clamp it in a face vise, then feed the dowel inventory from left to proper. Line up the tip of the dowel with the specified size on the ruler, and minimize it off with a small backsaw. If I’ve a lot of dowels to chop, I put a bucket on the ground to catch them as they fall off the tip of the jig. — Craig Bentzley
Here are some provides and instruments we discover important in our on a regular basis work across the store. We might obtain a fee from gross sales referred by our hyperlinks; nevertheless, we’ve got rigorously chosen these merchandise for his or her usefulness and high quality.