We might obtain a fee once you use our affiliate hyperlinks. However, this doesn’t affect our suggestions.

Last week I confirmed tips on how to make wood scales for a marking knife’s blade, then glue them in place, and this week we’ll see the fruits of this venture. 

After eradicating the clamps I held the knife between a vise’s jaws and filed down the brass pins till they had been flush with the scales. 

Important Safety Note!

Don’t overlook to masks up the uncovered blade, otherwise you may get lower – which is precisely what has occurred to me!

Pinch the file’s tip between your thumb and each index and center finger to accumulate full management of the submitting course of.

Pressure down with two fingers on the tip is one other frequent strategy to help submitting.

After masking the blade, I completed submitting the pins on each faces of the deal with and turned to the sides. The edges show the wood-steel sandwich and are a bit difficult to work with.

You can use a file and thoroughly file the entry wooden and epoxy however be aware as you get nearer to the metal. Your marking knife’s blade might have been hardened in its entirety and that signifies that a typical mill file is not going to lower it and may even be broken. Your choices listed below are two: swap to sandpaper block or use an additional hardened file just like the GROBET INOX Hand File.

Grobet Inox recordsdata are hardened to Rockwell 72 and can have the ability to deal with most blades. However, when you really feel that the file slips and may’t lower (it would make a squicky noise too) instantly swap to sandpaper.

Once the wooden and all of the metallic components had been evened out, use a file or sandpaper, to spherical over sharp corners, then chamfer the lengthy edges of the wood scales. Continue sanding with progressive sandpapers and end with 220 grit. 

I completed by making use of a wipe-on oil-varnish end, however any end that enhances the wooden will work right here. 

Creating a deal with for a knife is a enjoyable venture that can train you some fundamental metallic abilities. Working with brass, metal, and wooden you may spark up some future concepts of unique {hardware} or particulars to reinforce your initiatives. Brass (but additionally aluminum) mixed with darkish woods like mahogany or walnut could make a fashionable accent on any piece of effective furnishings, software, and extra.  

I hanged my knife utilizing a sunken magnet cap subsequent to my chisels. The metal mid-sandwich fringe of the knife is ideal for magnetic attraction.

Six years in the past I wrote, and illustrated, a weblog entry about marking knives and tips on how to use them. You can learn it right here.

Product Recommendations

Here are some provides and instruments we discover important in our on a regular basis work across the store. We might obtain a fee from gross sales referred by our hyperlinks; nonetheless, we now have rigorously chosen these merchandise for their usefulness and high quality.

Source link


Please enter your comment!
Please enter your name here