We might obtain a fee whenever you use our affiliate hyperlinks. However, this doesn’t affect our suggestions.
Add a contact of coloration to your hallway.
Our entrance corridor is often a disorganized mess: coats on the ground, keys strewn right here and there, and hats—effectively, I can by no means discover them. I constructed this wall shelf to supply a spot for all the pieces and to show some ornamental objects, too. When I used to be executed, my spouse thought it could be helpful within the kitchen too. Now, I’m making a second one!
Most of the wall shelf is constructed from 3/4″ pine, which you should purchase at a house heart. Just ensure it’s flat and straight. I used some previous wooden from a home I used to be reworking. The boards have been mismatched in coloration and filled with nail holes and different flaws, so I painted the wall shelf to mix the components collectively. I used inexperienced as a result of this coloration additionally symbolizes good stewardship of our assets, resembling recycling this lumber.
The joinery is fairly easy. Most of the components are simply butted and nailed collectively. Biscuits reinforce these joints and align the components, making meeting simpler.
Green Wall Shelf Cut List
Overall Dimensions: 26″ H x 42″ L x 6-1/2″ D
Part |
Name |
Qty. |
Material |
Th x W x L |
A |
Side |
2 |
Reclaimed Pine |
3/4″ x 5-1/2″ x 25-1/4″ |
B |
Bottom shelf |
1 |
Reclaimed Pine |
3/4″ x 5-1/2″ x 39″ |
C |
Middle shelf |
1 |
Reclaimed Pine |
3/4″ x 5-1/8″ x 39″ |
D |
Divider |
3 |
Reclaimed Pine |
3/4″ x 5-1/8″ x 3-1/2″ |
E |
Top |
1 |
Reclaimed Pine |
3/4″ X 6-1/2″ x 42″ |
F |
Peg board |
1 |
Reclaimed Pine |
3/4″ x 3-3/4″ x 39″ |
G |
Wall cleat |
1 |
Reclaimed Pine |
3/4″ x 2″ x 39″ |
H |
Back board |
14 |
Pine bead board |
5/16″ x 3-1/16″ x 20-1/4″ |
J |
Drawer entrance |
4 |
Reclaimed Pine |
half of″ x 3-7/16″ x 9-1/8″ |
Ok |
Drawer aspect |
8 |
Reclaimed Pine |
half of″ x 3-7/16″ x 4-7/8″ |
L |
Drawer again |
4 |
Reclaimed Pine |
3/8″ x 3-1/16″ x 8-5/8″ |
M |
Drawer backside |
4 |
Plywood |
1/4″ x 4-7/8″ x 8-5/8″ |
N |
Drawer knob |
4 |
||
P |
Peg |
5 |
Make the components
1. Start by ripping the edges (A) and backside shelf (B) to the identical width. Also, rip the center shelf (C) and dividers (D) to the identical width. Rip the highest (E), peg board (F) and wall cleat (G) to width. Trim all of those items to size. Note that the cabinets, peg board and cleat are the identical size.
2. Lay out the spacing of the drawer dividers on the center and decrease cabinets (Fig. A). Cut biscuit joints within the drawer dividers (Photo 1) and cabinets (Photo 2).
3. Rout a plate groove within the center shelf (Photo 3 and Fig. D). Dado or rout a rabbet within the again fringe of the underside shelf to obtain the again boards (Fig. C).
4. Temporarily clamp collectively the 2 cabinets and the drawer dividers. Stand this meeting on one of many sides, within the right location (Fig. E), and draw strains across the ends of the cabinets. Remove and unclamp the meeting. Butt the marked aspect to the unmarked aspect and switch the structure strains. Cut biscuit joints within the sides and the ends of each cabinets.
5. Cut and clean arches within the backside ends of the edges (Fig. E). Rout a rabbet on the edges for the again boards. Drill holes for the pegs (P) within the peg board.
Assembly
6. Glue and nail the underside shelf to the peg board (Photo 4). Make positive the ends are flush. Add the drawer dividers and center shelf (Photo 5). Make positive the fronts of those items are flush.
7. Add the edges (Photo 6). Clamp these joints, too.
8. Once the glue is dry, stand this meeting the wrong way up on the highest piece. Mark across the sides on the highest, then reduce biscuit slots within the high and ends of the edges. Glue the highest to the meeting (Photo 7).
9. Glue the wall cleat to the underside of the highest. Then add the again boards (Photo 8 and H). I bought this materials, able to go, at a house heart, however you would make your individual. When you put in these items, depart not less than a 1/16″ hole between every tongue and the underside of every groove. This area is critical to permit these items to develop when the humidity is excessive. Each piece received’t transfer a lot, however taken as an entire, the width of all of the again boards might improve by as a lot as half of″.
Build the drawers
10. Rip inventory for the drawer fronts (J) and sides (Ok). Rip inventory for the backs (L), that are 3/8″ narrower. Trim the fronts to size, about 1/16″ lower than the precise drawer openings. Trim the backs half of″ shorter than the fronts.
11. Cut grooves within the drawer fronts and sides for the drawer bottoms (M, Fig. A). Cut rabbets within the drawer fronts and sides. Drill holes for knobs (N) within the drawer fronts.
12. Temporarily clamp the drawers collectively and reduce bottoms to suit. Glue and nail the drawers collectively (Photo 9). As you assemble every drawer, insert the underside to maintain the drawer sq..
13. Glue knobs [Purchase Here] within the drawers and pegs [Purchase Here] within the peg board.
14. Fill the nail holes with putty (Photo 10), and also you’re prepared to color.
Finishing
15. Begin by softening each edge, as if it’s been dealt with for years (Photo 11). Then roughen up uncovered surfaces a bit with a traditional faker’s software: a bunch of keys and different {hardware} hooked up to a sequence (Photo 12).
16. To simulate years of grit, apply an acrylic texturing compound (Photo 13 and Sources, at backside). You can depart it thick or clean it out with the sponge.
17. Apply your favourite paint (Photo 14).
18. Mute the paint’s coloration and add some grime by making use of a glaze (Photo 15 and Sources). Use your brush to work the glaze round till your undertaking appears pure and well-loved.
Installation
19. The wall shelf ought to be flush to the wall and secured to studs. There are numerous methods to hold it. I used keyhole slots reduce behind the wall cleat and hung the cupboard on lengthy pan head screws pushed into the studs. That’s fussy work, although. It can be simpler to only drive screws proper by the face of the wall cleat and into the studs
SOURCES
• Folk Art Antiquing Medium (glaze), #819, Apple Butter Brown, 2 oz.
•Winsor & Newton Structure Gel (texturing compound), #02006-2105, 250 ml
Product Recommendations
Here are some provides and instruments we discover important in our on a regular basis work across the store. We might obtain a fee from gross sales referred by our hyperlinks; nonetheless, we have now fastidiously chosen these merchandise for his or her usefulness and high quality.